Flag sleeve
Location of the elasticated flag sleeve, when finished and attached.

Please note, this template contains a locked layer that is set to be non-printing. Any artwork elements that are put on this layer will not be included in exported PDFs, and will not be printed. Please check your exported artwork before sending it to us.

Cut line
Perimeter of the cut graphic area, before any finishing. The area inbetween this line and the finished line will be used for hems and attaching the sleeve.

Finished line
Perimeter of the visible graphic area, after the graphic has been finished.

Safe area line
Important content (text, logos etc.) must be kept within this line.

Bleed line
Artwork must extend to this line. The area in between this line and the safe area line must only be used as a quiet area.

Shapes

Artwork must be supplied:
•  At the exact size of this template
•  With all fonts outlined
•  With all images embedded
•  With all design elements on the Design layer
•  With all important content inside the safe area
•  With background/quiet content all the way to the bleed line
•  With none of the template guide lines included or flattened
•  With no crop marks, bleed marks, colour bars or other registration marks present
•  As either PDF (preferred), AI or EPS format
•  With exported files checked that all design elements are included
•  With both front and back designs included (applies only to double-sided flag templates)
For a full list of artwork requirements and further details, please refer to our website.

Artwork Requirements

Design. Must be used to create and supply your design.

Guide (Non-Printing). Must not contain any of your design elements.
May be deleted, if desired.

Layers

Size

136mm × 536mm
600mm × 2600mm

Template size:
Finished (full) size:

This template is 20% scale of full size, and must not be re-sized or scaled.